Filter
Top Products
Telnet Console Commands A-11
SET EN SPeed <1/2/5.5/6/9/11/12/18/24/48/54>
Sets 802.11b/g wireless speed in megabits per second (Mpbs).
SET EN SSID “<ssid>”
Sets 802.11b/g wireless SSID. Use quotes if there is a space in SSID. This is
case sensitive.
SH EN STATS
Shows the network I/O statistics.
SET EN WEP [DI/64/128]
Sets wired equivalent privacy encryption level to disabled, 64-bit, or 128-bit.
SET EN WIRED [AUTO/10BASE/100BASE]
Sets the Ethernet speed.
SET EN WPAAUTO [ENable/DIsable]
Selects whether to use WPA auto mode. When enabled, if a WPA-enabled access
point is not available, the print server connects to a non-WPA access point. Only
valid when WPA is enabled.
SET EN WPAGROUP [ENABLE/DISABLE]
Selects whether to use the WPA group key mode. When enabled, group keys are
used for data link encryption.
SET EN WPAPSK <WPAkey>
Sets the WPA pre-shared key or pass-phrase. Use 64 hex characters for the PSK
or 8-63 characters for the pass-phrase. This is only valid when authentication
mode is WPA-PSK.