Filter
Top Products
3-2 Care & Maintenance
Use any of the following items to clean the printhead:
♦ A soft cloth moistened with isopropyl alcohol.
CAUTION
Use isopropyl alcohol on the interior
areas only, never on the exterior.
♦ A Monarch Cleaning Pen (part number 114226).
To clean the printhead, platen roller, and supply
sensors:
1. Turn off the printer by pressing and holding P
until the display is blank.
Note: Do not use sharp objects to remove adhesive
or label particles from the printhead area.
2. Push down on the release buttons on both sides of
the printer to open the supply door. The supply
door should swing open.
3. Lay the printer on its back.
Release
Button