Filter
Top Products
4-2 Troubleshooting
Problem Solution
Supply does
not calibrate
properly.
Check the on-demand, black mark, die
cut, or non-indexed sensors. Refer to the
System Administrator's Guide for more
information. You may need a new sensor.
Common Errors
The following is a list of common printer errors you
may receive. If you receive a message not listed
here, see your System Administrator or call the
Service at the number listed on the back of this
manual.
Error Description
025
Invalid Length
String length is outside the range 0 to
2710.
101
Invalid/Missing
The format referenced by batch is not
in memory.
409
Memory Full
The printer memory is full. Delete
unnecessary formats or graphics from
memory.
410
Parity
Parity mismatch. Check your parity
settings at the printer and at the host.
411
Framing
Framing error (baud rate mismatch).
Check your baud rate settings at the
printer and at the host.
413
Overrun
Online receive queue is full. Check for
a flow control problem.
611
Error Loading
Font, bar code, or density in the batch
does not fit the format.
612
Invalid Data
The data in this line of the batch is
missing or does not match the format.
613
Invalid Data
Reference point off supply.