Filter
Top Products
10 C2684M (2/08)
Network Settings Tab
Use the Network Settings tab to manage network settings such as changing the unit mode and host name, turning on/off the Dynamic Host
Configuration Protocol (DHCP), or setting a static IP address.
Figure 5. Network Settings Tab
CHANGING THE UNIT MODE
The unit mode you select should be based on the configuration determined during installation. Refer to Application Scenarios in the installation
manual shipped with the EW5001 for more information.
To change the unit mode, do the following:
1. Open the Unit Mode drop-down box by clicking the down arrow.
2. Select a unit mode from the drop-down box.
3. The selected unit mode is now displayed in the Unit Mode box, as well as on the second tab.