Filter
Top Products
16 C2684M (2/08)
CHANGING THE BRIDGE CONNECTION SETTINGS
This setting manages how the bridge or backhaul component will connect to the appropriate device. The available settings allow the bridge or
backhaul to connect to another device automatically or manually by entering a valid media access control (MAC) address.
1. Select the Auto or Manual setting for the Bridge Discovery Mode. Auto is the default setting.
2. If the Bridge Discovery Mode is set to Auto, make sure that both devices are set to the same channel. Auto discovery will not function if the
devices are set to different channels.
3. If the Bridge Discovery Mode is set to Manual, click in the Peer Bridge MAC Address box.
4. Type the MAC address of the device to which the bridge will connect.