Filter
Top Products
14 C2684M (2/08)
CHANGING THE CHANNEL
If your network is experiencing excessive interference, the channel should be changed. When changing the channel, remember that all wireless
devices on the network must be set to the same channel.
To change the channel, do the following:
1. Open the Channel drop-down box by clicking the down arrow.
2. Select a channel from the drop-down box.
STATISTICS AND DIAGNOSTICS
The information in this section is for reference only, and will typically be used by Pelco Product Support in the event of video quality issues. This
section provides information about the location of the device on the network, how the network connections are functioning, and which devices are
connected.
To view all of the information available, open the drop-down boxes for Network Information, Wireless Statistics, System Information, and
Currently Connected Devices by clicking the down arrow beside each item.
Network Information
The Network Information section is a reflection of the settings assigned on the Network Settings tab. Refer to Network Settings Tab on page 10
for more information on these settings.
Wireless Statistics and System Information
The information in these sections will be useful to Pelco Product Support for troubleshooting purposes. In the event of a video quality issue, have
this information available when contacting Pelco for support.
Currently Connected Devices
This section provides the MAC address, speed, and RSSI for each of the devices connected to the EW5001.