Filter
Top Products
4 C2684M (2/08)
Welcome
The Endura
®
EW5001 is a high performance, single radio wireless unit that can be configured as either an access point or a bridge. There are
various network and device settings that can be applied depending on the application.
Refer to the installation manual shipped with your EW5001 for more information on application scenarios.
Accessing the EW5001
The EW5001 single radio wireless unit can be accessed and configured using either a standard Web browser (for example, Microsoft
®
Internet
Explorer
®
) or an Endura workstation.
USING AN ENDURA WORKSTATION
For detailed instructions on configuring devices using WS5000 Advanced System Software, refer to Configuring Devices in the operation manual
shipped with the Endura workstation.
LOGGING ON
Before starting, ensure that the computer on which the software is installed is configured to work on an Endura network. For information on
network requirements, consult the Endura Network Design Guide.
To start the application, double-click the Endura icon on the desktop. The Login dialog box appears. To log on, do the following:
1. Type your Endura user name.
2. Type your password.
3. Click OK.
NOTES:
• The default user name is admin. The default
password is also admin.
• User names and passwords are case-sensitive.
After you log on, the main window appears and the devices on your network start to load. Depending on the size of your network, the process
may take a few minutes. Check the lower-left corner of the application window to see the status of the device-loading process.
SETUP WINDOW
To access the EW5001 from the WS5000, do the following:
1. From the main window, click the Setup button on the toolbar to open the Setup window.
2. In the Setup window, click the Devices tab.
3. Select Wireless from the Device Type list.
The left-hand pane displays all devices on the network. The right-hand pane displays settings for the device currently selected from the tree
on the left.
You may only make changes to devices when they are online. If a device is not currently online, its icon appears with a red slash mark
across it and the text in the right-hand panel is unavailable, indicating that you cannot make changes.
4. Select a device to configure by left-clicking it. Depending on which device you select from the left-hand pane, a different group of settings
appears in the right-hand pane.
Figure 1. WS5000 Login Dialog Box