Filter
Top Products
IOLAN DS1/TS2 CLI Reference Guide, Version 4.1 17
Server Commands Chapter 2
2
This chapter defines all the CLI commands associated with configuring the IOLAN’s server
parameters.
Server Commands
Set Custom-App
Description You can create a custom application that can run on the IOLAN using the Perle SDK.
User Level Admin
Syntax
Options program-command-line
Set Server
set custom-app server program-command-line <command>
The name of the SDK program executable that has been already been downloaded to
the IOLAN, plus any parameters you want to pass to the program. Maximum of 80
characters. Use the
shell CLI command as described in the SDK Programmer’s Guide
to manage the files that you have downloaded to the IOLAN. For example, using
sample outraw program, you would type:
outraw -s 0 192.168.2.1:10001 Acct:10001
if you were starting the application on the Server (notice the
-s 0 parameter specifies
Line 1).
Description Sets server parameters.
User Level Admin
Syntax
set server [auto-obtain-gw on|off] [banner on|off] [break on|off]
[bypass-password on|off] [domain <string>]
[flush-on-close on|off] [internet <IPV4_address>]
[internet dhcp/bootp on|off]
[monitor-connection-every <seconds>][name <string>]
[netmask <IPV4_address>][oem-login on|off]
[password-limit <0-10>] [prompt-with-name on|off]
[single-telnet on|off]
set server tftp [retry <integer>] [timeout <integer>]
Options auto-obtain-gw
When DHCP/BOOTP is enabled, you can enable this option to have the IOLAN receive
the Default Gateway IP address from the DHCP/BOOTP server.