Filter
Top Products
Commands for Users Logged Into the IOLAN
28 IOLAN DS1/TS2 CLI Reference Guide, Version 4.1
Menu
Description Switches from a command line based interface to Menu mode of operation.
User Level Restricted, Normal, Admin
Syntax
Ping
Description This command checks to see if a given host is reachable via an IP message. The specific
message used is called a
ping.
User Level Normal, Admin
Syntax
Options <hostname/IP_address>
The DNS resolvable host name or IP address of the machine you are trying to ping.
<packet_size>
Enter the number of data bytes to be sent. The default is 100 bytes.
<#_of_packets>
Enter the number of the packets you want to send. The default is 10.
Resume
Description Resumes a started session.
User Level Restricted, Normal, Admin
Syntax
Options 1|2|3|4
The number of the session you want to resume.
Screen
Description Switches from a command line based interface to Menu mode of operation.
User Level Restricted, Normal, Admin
Syntax
Set Termtype
Description Sets the type of terminal being used for the current session.
User Level Normal, Admin
Syntax
Option wyse60|vt100|ansi|dumb|tvi925|ibm3151te|vt320|hp700|term1|term2|term3
menu
ping <hostname/IP_address> [<packet_size>] [<#_of_packets>]
resume 1|2|3|4
screen
set termtype
wyse60|vt100|ansi|dumb|tvi925|ibm3151te|vt320|hp700|term1|term2|
term3
Specifies the type of terminal connected to the line:
z Dumb
z WYSE60
z VT100
z ANSI
z TVI925
z IBM3151TE
z VT320 (specifically supporting VT320-7)
z HP700 (specifically supporting HP700/44)
z Term1, Term2, Term3 (user defined terminals)