Filter
Top Products
Administration Commands 129
TFTP File Transfer Commands
Netsave
configuration
Specifies that you are going to download a new configuration file to the IOLAN.
customlang
Specifies that you are going to download a custom language file to the IOLAN.
term1|term2|term3
You can create and download up to three custom terminal definitions to the IOLAN.
customapp-file
You can download multiple SDK program executables and ancillary files using this
command by running the command multiple times to download multiple files. Use the
shell CLI command as described in the SDK Programmer’s Guide to manage the files
that you download.
wan-driver
Download wireless WAN custom drivers to the IOLAN that have been downloaded
from the Perle website.
<hostname/IP_address>
The IP address or host name where the file you are downloading to the IOLAN resides.
If you are using a host name, it must be resolved in either the IOLAN’s
Host Table or a
DNS server.
<filename>
The complete path and file name of the file you are downloading to the IOLAN (this
path should be relative to the default path of your TFTP server, which may or may not
allow drive letters).
Description Transfers a file from the IOLAN to a remote host using the TFTP protocol.
User Level Admin
Syntax
netsave configuration|crash|serialt-buf|text-config
<hostname/IP_address> <filename>
Options configuration
Specifies that you are going to upload a configuration file from the IOLAN to the
specified host or IP address.
crash
Specifies that you are going to upload a crash file from the IOLAN to the specified host
or IP address.
serialt-buf
Specifies that you are going to upload the contents of the serial trace buffer.
text-config
Saves the current configuration to a text file on a TFTP server.
<hostname/IP_address>
The IP address or host name for where the file you are uploading from the IOLAN is
going. If you are using a host name, it must be resolved in either the IOLAN’s
Host
Table
or a DNS server.