Filter
Top Products
Server Commands 39
Authentication Commands
Set Authentication TACACS+
Set Authentication SecurID
Description Configures TACACS+ authentication settings.
User Level Admin
Syntax
set authentication tacacs+ [port <TCP_port>]
[primary <config_host>] [secondary <config_host>]
[secret <string>]
Options port
The port number that TACACS+ listens to for authentication requests. The default port
number is 49.
primary
The primary TACACS+ host that is used for authentication.
secondary
The secondary TACACS+ host that is used for authentication, should the primary
TACACS+ host fail to respond.
secret
The TACACS+ shared secret is used to encrypt/decrypt TACACS+ packets in
communications between two devices. The shared secret may be any alphanumeric
string. Each shared secret must be configured on both client and server sides.
Description Configures SecurID authentication settings.
User Level Admin
Syntax
set authentication securid primary [host <config_host>]
[port <TCP_port>] [encryption des|sdi] [legacy on|off]
set authentication securid replica [host <config_host>]
[port <TCP_port>] [encryption des|sdi] [legacy on|off]
set authentication securid reset secret
Options primary host
The first SecurID server that is tried for user authentication.
replica host
If the first SecurID server does not respond to an authentication request, this is the next
SecurID server that is tried for user authentication.
port
The port number that SecurID listens to for authentication requests. The default port
number is 5500.
encryption
You can specify either SDI or DES encryption for SecurID server communication. The
default is SDI encryption.
legacy
If you are running SecurID 3.x or 4.x, you need to run in Legacy Mode. If you are
running SecurID 5.x or above, do not select
Legacy Mode.
reset secret
Resets the SecurID secret (password) in the IOLAN.