Philips BDL425IV Projector Accessories User Manual


 
User Manual BDL4251V
25
Power Indicator
Status
Power ON Green
Power Standby Red
Power OFF LED Off
Diagnosis
(Detecting failure)
Red Blinking
* See troubleshooting
Using Power Management
Please turn off the LCD monitor when it will not be used for long time. This could potentially increase the life and decrease the power consumption of
the LCD monitor.
Standby mode: Push the power button on the remote control or on the monitor to enter the standby mode.
Power Off: Push the Main Power Switch to enter the power off mode.
Display Signal of Video Source Setting to [VIDEO]
Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO].
Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.
Picture Size
HDMI, DVI-D, VGA FULL NORMAL CUSTOM
REAL
COMPONENT, VIDEO FULL NORMAL DYNAMIC
REAL CUSTOM
Signal Type
NORMAL SIZE
Recommended Size
NORMAL
4:3
DYNAMIC
Squeeze
FULL
NORMAL: Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at COMPONENT or VIDEO signal.
FULL: Display in the entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with non-linearity. (Some round image might be cut by expansion.)
CUSTOM (ZOOM): Images can be expanded beyond the active display area. The image which is outside of the active display area would not be
shown.
REAL: Image will be displayed for one by one pixel.
ZOOM
ZOOM
Downloaded From TV-Manual.com Manuals