Philips CPWBS001 Network Router User Manual


 
Advanced Setup
Use the web management interface to define system parameters, manage
and control the Wireless Base Station and its ports, or monitor network
conditions.The following table outlines the selections available from this
program.
Menu Description
System Sets the local time zone, the password for administrator access, and the IP
address of a PC that will be allowed to manage the Wireless Base Station
remotely.
Internet Settings Specifies the Internet connection type:
Dynamic IP host configuration and the physical MAC address of each
media interface
PPPoE configuration
PPTP
Static IP and ISP gateway address
•• Specifies DNS servers to use for domain name resolution.
Local network Sets the TCP/IP configuration of the Wireless Base Station’s Local Network
interface and all DHCP clients.
Wireless Configures the radio frequency,SSID, and encryption for wireless
communications.
NAT Shares a single ISP account with multiple users, sets up virtual servers.
Firewall Configures a variety of security and specialized functions, including:Access
Control, Intrusion Detection , and DMZ.
DDNS Dynamic DNS provides users on the Internet with a method to tie their
domain name(s) to computers or servers.
UPnP With Universal Plug and Play,a device can automatically dynamically join a
network, obtain an IP address, communicate its capabilities, and learn about
the presence and capabilities of other devices. Devices can then directly
communicate with each other.This further enables peer-to-peer
networking.
Tools Contains options to backup & restore the current configuration,restore all
configuration settings to the factory defaults, upgrade system firmware, or
reset the system.
Status Provides Internet connection type and status, firmware and hardware
version numbers, system IP settings, as well as DHCP,NAT, and Firewall
information.
Displays the number of attached clients, the firmware versions, the physical
MAC address for each media interface, and the hardware version and serial
number.
Shows the security and DHCP client log.
ENGLISH 31