Philips EPIA-MII Computer Hardware User Manual


 
Installation
2-9
IEEE 1394 Port
The mainboard provides one standard 1394 port. You can
connect any 1394 (Firewire) device to this port.
Serial Port: COM1
The mainboard offers one 9-pin male Serial Port connector COM1. You can
attach a serial mouse or other serial devices directly to these port.
Card Slots: PCMCIA, CF
The mainboard comes with an add-on card that provides support for
PCMCIA and CF cards. The CF slot supports both type I and type II. These
slots are accessed on the same side as the ports.
Pin Signal Description
1 DCD Data Carry Detect
2 SIN Serial In or Receive Data
3 SOUT Serial Out or Transmit Data
4 DTR Data Terminal Ready
5 GND Ground
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
9RI Ring Indicate
15
6
9-Pin Serial Port
9