Filter
Top Products
BIOS Setup
3-7
IDE Primary Master/Slave, Secondary Master/Slave
Press Enter to enter the sub-menu and the following screen appears:
The specifications of your drive must match with the drive table. The hard
disk will not work properly if you enter improper information for this
category. Select
Auto whenever possible. If you select Manual, make sure the
information provided is from your hard disk vendor or system manufacturer.
IDE <Primary
Master>
The name of this menu item will match the
name of the menu. The settings are None,
Auto, Manual.
Access Mode The settings are
CHS, LBA, Large, Auto.
Capacity The formatted size of the storage device.
Cylinder Number of cylinders.
Head Number of heads.
Precomp Write precompensation.
Landing Zone Cylinder location of the landing zone.
Sector Number of sectors.
PIO Mode The settings are
Mode 0/1/2/3/4, Auto.
Ultra DMA Mode The settings are
Disabled and Auto.