Filter
Top Products
Installation
2-13
IrDA Infrared Module Connector: FIR
This connector allows you to connect an IrDA Infrared module. You must
configure the setting through the BIOS setup to activate the IR function.
Consumer Infrared Module / PS2 Header: KBMS
When the header is not in use, please short pin 3&5, pin 4&6, pin 7&9, and
pin 8&10.
Pin Signal
1VCC
2IRRX2
3IRRX
4GND
5IRTX
Pin Signal Pin Signal
1+5V 2GND
3 KB_CLK 4 KB_DATA
5 EXT_KBCLK 6 EXT_KBDATA
7MS_CLK 8MS_DATA
9 EXT_MSCLK 10 EXT_MSDATA
CLE266
FIR
5
1
12
10 9
CIR / EXT. KBMS
CLE266