Filter
Top Products
BIOS Setup
3-21
PS2MS Wakeup from S3/S4/S5
This setting can be used to wakeup the system from power saving mode
through mouse. Settings:
Disabled and Enabled
PS2KB Wakeup from S3/S4/S5
Select which Hot-Key to wake-up the system from power saving mode.
Settings:
Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6, Ctrl+F7,
Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake
and Any Key
USB Resume
Decide whether or not USB devices can wake the system from suspend
state. Settings:
Disabled and Enabled
PowerOn by PCI Card
Decide whether or not any PCI card can power up the system or resume
from suspend state. Such PCI cards include LAN, onboard USB ports,
etc. Settings:
Disabled and Enabled
Wake On LAN/Ring Connector
Decide whether or not any Ring-In signals from the modem can wake up
the system or resume from suspend state. Settings:
Disabled and Enabled
RTC Alarm Resume
The field is used to enable or disable the feature of booting up the system
on a scheduled time/date. Settings:
Disabled and Enabled
Date (of Month)
This field can only be set if RTC Alarm Resume is enabled. The field
specifies the date for
RTC Alarm Resume.
Resume Time (hh:mm:ss)
This field can only be set if RTC Alarm Resume is enabled. The field
specifies the time for
RTC Alarm Resume.