Filter
Top Products
BIOS Setup
3-19
Power Management Timer
Set the idle time before system enters power saving mode. ACPI OS such as
Windows XP will override this option. Settings:
Disabled and 1/2/4/6/8/10/20/
30/40
(minutes) and 1 (hour)
Video Off Option
Select whether or not to turn off the screen when system enters power saving
mode, ACPI OS such as Windows XP will override this option. Settings are:
Power Off by PWRBTN
This field configures the power button function. Settings are:
Run VGABIOS if S3 Resume
Select whether to run VGA BIOS if resumed from S3 state. This is only
necessary for older VGA drivers, select
Auto if in doubt. Settings: Auto, Yes
and
No
AC Loss Auto restart
The field defines how the system will act after an AC power loss during
system operation.
Off will keep the system in an off stat until the power
button is pressed. When set to
On the system will restart when the power is
back.
Former-Sts will restore the system to its previous state. Settings: Off, On,
Former-Sts
Always On The screen is always on even when system
enters power saving mode.
Suspend -> Off The screen is turned off when system enters
power saving mode.
Delay 4 Sec The system is turned off if power button is pressed
for more than four seconds.
Instant-Off The power button functions as a normal power-on/-
off buttton.