Filter
Top Products
Settings · Set Up Power Saving Function 55
EN
13 Settings
Modifying the Basic Settings
Settings
Cursor Navigation 6
Set Up Power Saving
Function
Set Up Power Saving Function
You use this function to set after what period of time
the device switches to power saving mode following the
print job. Whenever you receive a fax or if you would
like to print or make a copy, your device will automati-
cally switch back from its energy saving mode to its
operating mode.
1 Press ECO.
2 Use [ to select
POWER SAVE.
3 Confirm with OK.
4 Select the time (in minutes) after which the device
should switch to power saving mode using [. You
can choose between: 0, 2, 10, 30 minutes (factory
default: 2 minutes). Select
0 if the device should
switch to the power saving function immediately
after a print job.
5 Confirm with OK.
Set Up Toner Saving
Function
Set Up Toner Saving Function
You use this function to switch on the toner saving func-
tion. The print appears a little paler, thereby increasing
the number of pages that you are able to print with one
toner cartridge.
1 Press ECO.
2 Use [ to select
TONER SAVE.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Set Up Paper Saving
Function
Set Up Paper Saving Function
Using this function, switch on automatic Duplex printing
for printing and copying in order to save paper. With
Duplex printing, both sides of the paper are printed.
1 Press ECO.
2 Use [ to select
PAPER SAVE.
3 Confirm with OK.
4 Select one-sided print (Simplex) or double-sided
print (Duplex) using [.
5 Confirm with OK.
Notice
Modifying the Basic Settings
The changed settings are stored as new
default settings. If you select a special function
for a one-time process, take care to restore
the default settings or factory settings after
that.
Notice
Calling the Web Interface
You can also edit the device settings with the
device's web interface (see also the chapter
Web Interface, page 20).
Notice
Navigating in the Menu
You can move the cursor using [. Press C
to return to the previous menu level. Press j
to close the menu and return to the starting
mode.
Notice
Access Function
You can also call the function by pressing
C, 0021 and OK.
Notice
Access Function
You can also call the function by pressing
C, 0022 and OK.
Notice
Access Function
You can also call the function by pressing
C, 0023 and OK.