Filter
Top Products
28
Sensaphone
®
2000 User’s Manual
5.Insert disk 1 of the CPP Monitor 2000 Database.
6.Select Start>Run and type a:\Setup.exe and click OK. This will
install the Borland Database Engine.
7.Follow the prompts and install disk 2 when instructed.
8.Follow the prompts until installation is complete.
WINDOWS 3.1 INSTALLATION
1.Start Windows.
2.Insert disk 1 labelled Sensaphone 2000.
3.Select File>Run and type in a:\Setup.exe. Click OK.
4.Follow the prompts until the installation is finished.
5.Insert disk 1 of the CPP Monitor 2000 Database.
6.Select File>Run and type a:\Setup.exe and click OK. This will
install the Borland Database Engine.
7.Follow the prompts and install disk 2 when instructed.
8.Follow the prompts until the installation is complete.
Running the Software
To run the software, double click the 2000 icon. When the software
runs for the first time a configuration screen will appear. This will
automatically configure your modem settings and local serial port if
selected. If you have an external modem, make sure it is ON before
you proceed. If you would prefer to configure the software manu-
ally, you may do so after installation. When you start the software
you’ll see the main menu and toolbar. These menus and tools will
allow you to open new 2000 units, communicate with existing 2000-
units, observe real-time input values and numerous other features.
Pictured below is the Automatic Port Detection form.