Filter
Top Products
34
En
Other Operations
English
Activating the timer
The timer can be used to operate a preset program.
1 Press the MENU button to display the menu
screen.
SCREEN SETUP OPTION
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
H.ENHANCE
V.ENHANCE
PICTURE RESET
PICTURE
MENU INPUT1
ENTER
SET
EXIT
MENU
2 Use the 2/3 buttons to select [OPTION].
MENU INPUT1
ENTER
SET
EXIT
MENU
SCREEN SETUP OPTION
LANGUAGE
ENERGY SAVE
TIMER SETTING
SCREEN MGT.
SPLIT FREEZE
AUTO SETUP MODE
AUTO FUNCTION
PIP DETECT
PICTURE
:STANDARD
:INACTIVE
:OFF
:ACTIVE
:ENGLISH
:OFF
3 Use the 5/∞ buttons to select [TIMER SETTING],
then press the SET button.
MENU INPUT1
ENTER
SET
EXIT
MENU
SCREEN SETUP OPTION
LANGUAGE
ENERGY SAVE
TIMER SETTING
SCREEN MGT.
SPLIT FREEZE
AUTO SETUP MODE
AUTO FUNCTION
PIP DETECT
PICTURE
:STANDARD
:INACTIVE
:OFF
:ACTIVE
:ENGLISH
:OFF
4 Use the 5/∞ buttons to select [PROGRAM/
REPEAT].
CHANGE
SET
EXIT
MENU
TIMER SETTING
PROGRAM/REPEAT
RETURN
:OFF
PRESENT TIME
5 Press the 2/3 buttons to activate the setting.
The factory default setting is [OFF].
Each time the button is pressed, the setting alternates
as follows:
6 When finished with the setting, use the 5 /∞
buttons to select [RETURN], then press the SET
button to return to the normal screen image.
[PROGRAM] setting
÷ Every day, power turns on at 10:00.
Input and function settings are the same as those set
the last time the unit was turned OFF.
÷ At 20:00 (8 o'clock PM), the screen turns white.
At 21:00 (9 o'clock PM), power turns OFF.
[REPEAT] setting
÷ Screens for INPUT1 and INPUT2 are displayed
alternately for ten minutes duration each.
MENU
5/∞
SET
2/3
Other Operations
STANDBY/ON MENU
DISPLAY
/ SET
– VOL +INPUT SCREEN SIZE
2/3MENU SET 5/∞
Remote control unit
Main unit operating panel
3 OFF
REPEAT 2 PROGRAM 2