Filter
Top Products
7
En
Part Names and Functions
English
-
=
0
~
!
#
%
$
2
3
7
@6
8
9
1
5
4
Remote control unit
When handling the remote control unit
¶ Do not drop the remote control unit or expose it to
moisture.
¶ Do not use the remote control unit in a location subject to
direct sunlight, heat radiation from a heater, or in a place
subject to excessive humidity.
¶ When the remote control unit’s batteries begin to wear out,
the operable distance will gradually become shorter. When
this occurs, replace all batteries with new ones as soon as
possible.
5 SET button
Press to adjust or enter various settings on the unit
(pages 17 to 36).
6 SUB INPUT button
During multi-screen display, use this button to change
inputs to subscreens (page 23).
7 SPLIT button
Press to switch to multi-screen display (page 23).
8 MUTING button
Press to mute the volume (page 20).
9 ID NO. SET button
Button used by professional installers.
0 AUTO SET UP button
When using computer signal input, automatically sets
the [POSITION], [CLOCK] and [PHASE] to optimum
values (page 26).
- STANDBY/ON button ( )
Press to put the unit in operation or standby mode
(page 19).
= DISPLAY button
Press to view the unit’s current input and setup mode
(page 20).
~ POINT ZOOM button
Use to select and enlarge one part of the screen (page
22).
! FREEZE button
When memo screen function is enabled, a still image
is displayed in the subscreen (page 36).
@ SWAP button
During multi-screen display, use this button to switch
between main screen and subscreen (page 23).
# PIP SHIFT button
When using the picture-in-picture mode with multi-
screen display, use this button to move the position of
subscreen (page 23).
$ VOLUME (+/–) buttons
Use to adjust the volume (pages 19 and 20).
% CLEAR button
Button used by professional installers.
Part Names and Functions
1 SCREEN SIZE button
Press to select the screen size (page 21).
2 INPUT buttons
Press to select the input (page 19).
3 MENU button
Press to open and close the on-screen menu
(pages 17 to 36).
4 ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various
settings on the unit (pages 17 to 36).