Filter
Top Products
31
En
Other Operations
English
Energy saving settings
(ENERGY SAVE)
The power control function allows screen brightness to
be suppressed as a means of lowering power
consumption and reducing display deterioration.
1 Press the MENU button to display the menu
screen.
SCREEN SETUP OPTION
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
H.ENHANCE
V.ENHANCE
PICTURE RESET
PICTURE
MENU INPUT1
ENTER
SET
EXIT
MENU
2 Use the 2/3 buttons to select [OPTION].
MENU INPUT1
ENTER
SET
EXIT
MENU
SCREEN SETUP OPTION
LANGUAGE
ENERGY SAVE
TIMER SETTING
SCREEN MGT.
SPLIT FREEZE
AUTO SETUP MODE
AUTO FUNCTION
PIP DETECT
PICTURE
:STANDARD
:INACTIVE
:OFF
:ACTIVE
:ENGLISH
:OFF
Other Operations
MENU
5/∞
SET
2/3
3 Use the 5/∞ buttons to select [ENERGY SAVE].
MENU INPUT1
CHANGE
SET
EXIT
MENU
SCREEN SETUP OPTION
LANGUAGE
ENERGY SAVE
TIMER SETTING
SCREEN MGT.
SPLIT FREEZE
AUTO SETUP MODE
AUTO FUNCTION
PIP DETECT
PICTURE
:STANDARD
:INACTIVE
:OFF
:ACTIVE
:ENGLISH
:OFF
4 Press the SET button to select [ENERGY SAVE]
setting.
The factory default setting is [STANDARD].
Each time the SET button is pressed, the setting
changes as follows:
÷ STANDARD1 .... Normal image brightness
÷ STANDARD2 .... Brightness is controlled in
accordance with input signal to
produce easily viewed image.
(PDP-507CMX only)
÷ AUTO ............... Brightness is set automatically in
response to ambient lighting
conditions so as to produce
optimum image appearance. (PDP-
507CMX only)
÷ MODE1 ............ Brightness is controlled in
accordance with input signal, but
power consumption is less than
that used in [STANDARD] mode.
÷ MODE2 ............ Brightness is controlled in
accordance with input signal, but
power consumption is less than that
used in [MODE1].
÷ MODE3 ............ Brightness is set at fixed level,
regardless of input signal level.
Effective at reducing screen aging
due to burned lag images, etc.
÷ MUTE* ............. Use to temporarily turn off the
displayed image.
* To restore the image
÷ Press either of the MENU, DISPLAY, SUB INPUT, SPLIT,
SWAP, or PIP SHIFT buttons.
÷ Switches the input signal.
÷ Sets unit to standby mode.
5 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
The [ENERGY SAVE] setting affects all input sources.
STANDBY/ON MENU
DISPLAY
/ SET
– VOL +INPUT SCREEN SIZE
2/3MENU SET 5/∞
Remote control unit
Main unit operating panel
3 STANDARD2
MODE3 2 MODE2 2
3 STANDARD1
MUTE 2
3 AUTO
MODE1 2