Pioneer PDP-607CMX Projector Accessories User Manual


 
36
En
Other Operations
English
Setting the memo screen
(SPLIT FREEZE)
When set to any setting other than [OFF], the image
displayed when the FREEZE button is pressed will be
displayed in a subscreen as a freeze-frame image.
1 Press the MENU button to display the menu
screen.
SCREEN SETUP OPTION
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
H.ENHANCE
V.ENHANCE
PICTURE RESET
PICTURE
MENU INPUT1
ENTER
SET
EXIT
MENU
2 Use the 2/3 buttons to select [OPTION].
MENU INPUT1
ENTER
SET
EXIT
MENU
SCREEN SETUP OPTION
LANGUAGE
ENERGY SAVE
TIMER SETTING
SCREEN MGT.
SPLIT FREEZE
AUTO SETUP MODE
AUTO FUNCTION
PIP DETECT
PICTURE
:STANDARD
:INACTIVE
:OFF
:ACTIVE
:ENGLISH
:OFF
3 Use the 5/ buttons to select [SPLIT FREEZE].
MENU INPUT1
CHANGE
SET
EXIT
MENU
SCREEN SETUP OPTION
LANGUAGE
ENERGY SAVE
TIMER SETTING
SCREEN MGT.
SPLIT FREEZE
AUTO SETUP MODE
AUTO FUNCTION
PIP DETECT
PICTURE
:STANDARD
:INACTIVE
:OFF
:ACTIVE
:ENGLISH
:OFF
4 Press the SET button to activate the setting.
The factory default setting is [OFF].
Each time the button is pressed, the setting alternates
as follows:
÷ OFF ................ The still picture displayed at the time
the FREEZE button was pressed is
displayed as a single fullscreen
image.
÷ S BY S ............ When the FREEZE button is
pressed, the freeze-frame image will
be displayed in the side-by-side
subscreen.
÷ PIP.................. When the FREEZE button is
pressed, the freeze-frame image will
be displayed in the picture-in-picture
(left-bottom to left-top) subscreen.
5 When finished with the setting, press the MENU
button to return to the normal screen image.
Notes
This function is subject to the following conditions:
÷ It does not function during multi-screen display.
÷ It will be disabled if the FREEZE button is pressed again while
the function is operating.
÷ It will be disabled if set to multi-screen display while the
function is operating.
÷ The [SPLIT FREEZE] seting afects all input sources.
MENU
5/
SET
2/3
Other Operations
STANDBY/ON MENU
DISPLAY
/ SET
VOL +INPUT SCREEN SIZE
2/3MENU SET 5/
Remote control unit
Main unit operating panel
3 OFF 3 S BY S 3 PIP