Filter
Top Products
19
N500 User Guide
CHANGING
SETUP OPTIONS
User Setup
- Exit
- OFF Autoclear Cat
- OFF Autoclear Zone
- ON ClrZoneNewCat
- OFF Auto Weigh Hold
- Supervisor Setup
- Service Setup
User Options
You may want to configure the scale
to more closely meet your
requirements. To enter Setup
Mode, press the Setup key and
review the list of user setup options
Service Setup is accessible only by
Pitney Bowes Customer Service Representatives.
User Options are set to either on or off. They concern information you
can retain from mailpiece to mailpiece. The options are defined below.
Option Function
Autoclear Cat When on, category information clears when
you remove a mailpiece from the scale.
Autoclear Zone When on, zone information
(Displays only when clears when you remove a mailpiece from
Autoclear Cat is off.) the scale.
Clear Zone New Cat When on, the zone clears when you select a
new category.
Auto Weigh Hold When on, automatically retains weight
reading for 10 seconds after mailpieces are
removed from the platform. See page 14
1. Press the menu selection key next to the option you want to
change. The screen indicates your change.
2. Select Exit to escape this menu.
3. Select Save or Cancel to save or cancel your changes.
After exiting setup mode, the scale reinitializes and returns to ready
mode.