Filter
Top Products
4
CHAPTER 1: INTRODUCTION
1
CONNECTING
WIRES, CABLES, &
METER
Your scale should already have been installed, either by yourself or by a
Pitney Bowes engineer. This section has been included to assist you if a
lead comes loose or you relocate the system.
1. Connect the small end
of the power cord to the
scale.
2. If using a Postage Meter,
connect the small end
of the meter cable to the
scale connector A.
Some meter cables may
have a second connector
which locates onto scale
connector B. If your
cable doesn’t have this
second connector,
nothing needs to be
connected at point B.
3. Tuck the cord(s) under
the guides on the
bottom of the scale.
B
A