Filter
Top Products
20
CHAPTER 2: USING YOUR SCALE
Note: Pressing Exit
while in a supervisor
option returns you
to the previous
screen.
Default Option Description
Off Other Language Not used in the UK at this time.
Off Inscriptions Not used in the UK at this time.
Off Accounting Not used in the UK at this time.
Off Vibration Filter Turn on this option only in areas of
excessive vibration to aid the
display of stable weight.
Green
Green Red
→
→ →→→
Certain options are password-protected for supervisory control.
You can access these options by pressing the Setup key and selecting
Supervisor Setup.
At the Enter Password prompt:
1. Enter the supervisor password, M G R, on the colour-coded and
alphanumeric keys from left to right as shown.
2. Press Enter. The menu options are Exit and Configure Scale. See
the chart below for definitions of Configure Scale. Pressing Exit
returns you to the User Setup screen.
3. Select the desired options and respond to the prompts.
4. When finished, select Exit twice to exit the supervisor and user
setup menus.
5. Select Save or Cancel to save or cancel your changes.
6. After exiting Setup Mode, the scale reinitializes and returns to ready
mode.
Supervisor Options