Filter
Top Products
27
N500 User Guide
1. Tu rn power OFF at the wall
outlet.
2. Remove the platform by
lifting straight upwards.
3. Slide the old PROM out of
its location slot. Resistance
will be felt. Put this PROM
to one side for now.
4. Slide the new PROM into
the empty slot ensuring the
opening in the PROM
handle is in the top right
hand corner. Resistance will
be felt once the PROM has
made contact with its
connector.
5. Push the PROM into its slot until it snaps into place and is firmly
seated into its connector. MODERATE pressure may be required.
6. Refit the platform and turn the scale ON from the wall outlet.
If, after fitting the PROM and switching ON, the scale display will
not light or an error is displayed, check that the PROM has been
fitted fully into its slot as described above. If the scale still does not
function correctly, call Pitney Bowes for assistance.
7. Make sure the scale is level after fitting the PROM. If necessary, re-
level the scale by turning its feet until the bubble in the level
indicator is centred.
8. Return the old PROM to Pitney Bowes following the instructions
received with the new PROM.
Fitting the PROM