Filter
Top Products
3.4 Management Setup Menu
Management Setup Menu contains three options: Network Configuration, Console Port
Status Display, and Management Features Control.
3.4.1 Network Configuration
To display the current network settings of switch, select 1 from Management Setup Menu.
This screen also allows user to modify these settings including IP address, Subnet Mask,
and Default Gateway.
Be reminded that after modifying some settings, you must use option 4 to apply changes,
and go back to Main Menu, use option 6 to save changes to NVRAM. Moreover, the IP
addresses of switch and Default Gateway have to be in the same IP segment; otherwise,
GSW-1402S will not apply such configuration.
3.4.2 Console Port Status Display
To display the parameters used for console port access, select 2 from Management
Setup Menu.
3.4.3 Management Features Control
This screen allows user to control web and telnet management features.
3.4.3.1 Web-based Capability
Select 1 from Management Features Control Menu. To enable or disable web
management interface, select 1. To view or modify HTTP access port number, select
2. Please note that GSW-1402S only accept port number 80 or range from 1000 to
2000.
7