Filter
Top Products
11
3.5.3.1 Mirror Function
To set the Mirror Function active or inactive, select 1 from Port Mirror Menu.
3.5.3.2 Choose Sniffer Port
To change current sniffer port, select 2 from Port Mirror Menu. Then enter the desired
port number.
3.5.3.3 Choose Monitored Port
To change current monitored port, select 3 from Port Mirror Menu. Then enter the
desired port numbers. If you want to enter two numbers, please use a comma
between numbers.
3.5.4 Port Aggregation
Port Aggregation (Port Trunk) is used to increase the bandwidth of a switch-to-switch
connection. GSW-1402S provides 8 port aggregation groups. Each group consists of 2
ports and creates bandwidth up to 4Gbps at full duplex mode.
To enter Port Aggregation Menu, select 4 from Device Control Menu.
This screen shows status of all aggregation groups. To modify the status of a specific
group, key in the group number below, then enable or disable its function.