1
Chapter 1 INTRODUCTION
1.1 Checklist
Check the contents of your package for following parts:
l GSW-1402S.
l CD-ROM.
l Quick Installation Guide
l Power cord.
l 19” rack mount brackets.
l RS-232 cable.
If any of these pieces are missing or damaged, please contact your dealer immediately, if
possible, retain the carton including the original packing material, and use them against to
repack the product in case there is a need to return it to us for repair.
1.2 About the Switch
The Switch GSW-1402S is designed to allow simultaneous transmission of multiple
packets via an internal high-speed data channel. This means that it can partition a
network more efficiently than bridges or routers in most environments.
The Switch is equipped with Category 5 copper cable or fiber optic cable for uplinking to a
network backbone or network server. It is compatible with all 10Mbps, 100Mbps and
1000Mbps Ethernet environments. The increased speed and extra bandwidth offered by
Gigabit Ethernet will support faster and more users applications with generating more
traffic.
In addition, the Switch is also support two module slots for 10/100/1000Base-T,
1000Base-SX and 1000Base-LX modules to uplink to a server or network backbone.
These Switches are designed for Plug and Play installation, allows the network
administrator to simply connect the network and power cables and the Switching/bridging
functions begin automatically.
The front panels of these Switches provide LEDs for easy recognition of the switch
operation status and for troubleshooting. These LEDs display the power status for the
system and activity/ speed status for each port.
The built-in console interface and web interface can be used to configure the Switch’s
setting for VLAN, and Port Trunk Groups, Port Mirroring and Port Speed, flow control
enable/ disable.
1.3 Features
w 14 port 10/100/1000Base-T and 2 slots for 1000Base-T or 1000Base-SX/LX module
w 32Gbps switch fabric, true non-blocking switch architecture, wire-speed forwarding
w Provide 4K MAC address entries
w Complies with IEEE 802.3x, full-duplex flow control, IEEE 802.3z 1000Base-SX/LX,
IEEE 802.3ab 1000Base-T, IEEE 802.3/802.3u (10/100Base-TX), IEEE 802.1Q VLAN
w Configurable through console, Telnet and Web
w Support up to 255 802.1Q VLAN group
w Port Trunking Support
w Port Mirroring for dedicated ports monitoring
w MDI/MDI-X auto-detection