Planet Technology 10/100/1000Mbps Gigabit Ethernet Web-manageable Switch Switch User Manual


 
4.2.1 Save
This button enables user to save current settings to NVRAM. After click on it, the following
message box appears. Click Yes to save settings, click No to abort.
4.2.2 Default
This button enables user to reset GSW-1402S to factory default values. After click on it,
the following message box appears. Click Yes to reset switch, click No to abort.
4.2.3 Reboot
This button enables user to reboot switch without unplug the power cord. After click on it,
the following message box appears. Select boot type (Warm Boot or Cold Boot). Then
click OK to reboot, or click Close to abort.
16