Filter
Top Products
Rear Panel Port and Button Definition
Connector Description
POWER
Button
The power button is for turn on or turns off the router.
Reset
The reset button can restore the default settings of device. To restore factory
defaults, keep the device powered on and push a paper clip into the hole.
Press down the button over 5 seconds and then release.
Power
Power connector with 12V DC 1.5 A
Ethernet
1-4
Router is successfully connected to a device through the corresponding port
(1, 2, 3, or 4). If the LED is flashing, the Router is actively sending or receiving
data over that port.
Line
The RJ-11 connector allows data communication between the modem and the
ADSL network through a twisted-pair phone wire.
13