Filter
Top Products
network.
Flashing Modem is trying to establish a connection to telecom’s network.
Data
Flashing Data is transferred between Router and Internet.
ON Link
LAN
Flashing TX or RX activity.
Rear Panel
Rear Panel Port and Button Definition
Connector Description
POWER
Button
The power button is for turn on or turns off the router.
Power
Power connector with 10V DC 1.0 A
Reset
The reset button can restore the default settings of device. To restore factory
defaults, keep the device powered on and push a paper clip into the hole.
Press down the button over 5 seconds and then release.
Ethernet
Router is successfully connected to a device through the Ethernet port. If the
LED is flashing, the Router is actively sending or receiving data over that port.
Line
The RJ-11 connector allows data communication between the modem and the
ADSL network through a twisted-pair phone wire.
9