Filter
Top Products
3.5 WAN
3.5.1 WAN Interface
ADSL 2/2+ Router provide 8 PVCs with different channel mode. You can select the Bridge /
MER / PPPoE / PPPoA mode for your environment.
Bridge Mode
The device can be configured to act as a bridging device between your LAN and your ISP.
Bridges are devices that enable 2 or more networks to communicate as if they are 2
segments of the same physical LAN.
ADSL 2/2+ Router is bridge mode enabled by factory default.
1. Open the WEB page in “WAN Æ WAN Interface”.
2. Select the Channel Mode to “1483 Bridged”. Set the parameters VPI / VCI and
Encapsulation mode according to the ISP provided.
3. Click “Add” button to add this channel into VC table. You can use the “Modify” and
“Delete” button to manage your PVC.
4. Go to “Admin Æ Commit/Reboot” menu, clink “Commit and Reboot” button.
The device will reboot and apply this setting.
“Commit and Reboot”: Whenever you use the web console to change system
settings, the changes are initially placed in temporary storage. To save your changes for
future use, you need to use the commit function. This function saves your changes from
RAM to flash memory and then reboot the system.
36