Filter
Top Products
Pre-shared Key Format: Select the Passphrase or Hax format.
Pre-shared Key: Enter the pre-shared key for WPA. Client stations must use the same key
in order to connect with this device. Check the table below for instructions when entering
the key.
Radius Port: Enter the port number of the authentication server. The default port number is
1812.
Radius Server IP Address: Enter the IP Address of the authentication server.
Radius Password: Enter the same key as the Radius server’s.
Click "Apply Changes" again to save the wireless security options and make the change
take effect.
Note: Please Commit/Reboot if you want to make this settings effective immediately
3.4.3 Advance Setting
These settings are only for more technically advanced users who have a sufficient
knowledge about wireless LAN. These settings should not be changed unless you know
what effect the changes will have on your Access Point.
Fragment Threshold: The threshold (number of bytes) for the fragmentation boundary for
directed messages. It is the maximum data fragment size that can be sent. Enter a value
between 256 and 2346.
RTS Threshold: The RTS (Request To Send) threshold (number of bytes) for enabling
RTS/CTS handshake. Data with its frame size larger than this value will perform the
RTS/CTS handshake. Set this attribute to be larger than the maximum MSDU (MAC
Service Data Unit) size TURNS OFF the RTS/CTS handshake. Set this attribute to ZERO
TURNS ON the RTS/CTS handshake. Enter a value between 0 and 2347.
33