Filter
Top Products
ADE-4300/ADW-4300 User Guide
6
Physical Details
Front-mounted LEDs of ADE-4300
Figure 2-1: Front Panel of ADE-4300
Front-mounted LEDs of ADW-4300
Figure 3-2: Front Panel of ADW-4300
PWR LED On - Power on.
Off - No power.
STATUS
LED
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware
Upgrade.
LAN LED
For each port, there are 2 LEDs, to indicate the connection speed
(10BaseT or 100BaseT) of each port.
· 100 LNK/ACT - This will be ON if the LAN connection is using
100BaseT, and Blinking if data is being transferred via the cor-
responding LAN port.
· 10 LNK/ACT - This will be ON if the LAN connection is using
10BaseT, and Blinking if data is being transferred via the corre-
sponding LAN port.
· If neither LED is on, there is no active connection on the corre-
sponding LAN port.
WLAN LED
(ADW-4300
only)
On - Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wireless
access point. This includes "network traffic" as well as user data.
ADSL LED On - ADSL connection is available.
Off - No ADSL connection available.
Flashing - Data is being transmitted or received via the ADSL
connection.