Filter
Top Products
ADE-4300/ADW-4300 User Guide
12
If you can't connect
If the ADE-4300/ADW-4300 does not respond, check the following:
· The ADE-4300/ADW-4300 is properly installed, LAN connection is OK,
and it is powered ON. You can test the connection by using the "Ping"
command:
· Open the MS-DOS window or command prompt window.
· Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or your
PC's IP address is not compatible with the ADE-4300/ADW-4300's IP
Address. (See next item.)
· If your PC is using a fixed IP Address, its IP Address must be within the
range 192.168.0.2 to 192.168.0.254 to be compatible with the ADE-
4300/ADW-4300's default IP Address of 192.168.0.1. Also, the Network
Mask must be set to 255.255.255.0. See Chapter 4 - PC Configuration
for details on checking your PC's TCP/IP settings.
· Ensure that your PC and the ADE-4300/ADW-4300 are on the same
network segment. (If you don't have a router, this must be the case.)
· Ensure you are using the wired LAN interface. The Wireless interface
can only be used if its configuration matches your PC's wireless set-
tings. (ADW-4300 only)
Setup Wizard
The first time you connect to the ADE-4300/ADW-4300, the Setup Wizard will run
automatically. (The Setup Wizard will also run if the ADE-4300/ADW-4300's default
settings are restored.)
1. Step through the Wizard until finished.
· You need the data supplied by your ISP. Most connection methods require some
data input.
· The common connection types are explained in the following table.
2. On the final screen of the Wizard, run the test and check that an Internet connec-
tion can be established.
3. If the connection test fails:
· Check all connections, and the front panel LEDs.
· Check that you have entered all data correctly.