Filter
Top Products
ADE-4300/ADW-4300 User Guide
116
Wireless LAN Configuration
To allow Wireless Stations to use the Access Point, the Wireless Stations and the
Access Point must use the same settings, as follows:
Mode
On client Wireless Stations, the mode must be set to "Infrastruc-
ture".
(The Access Point is always in "Infrastructure" mode.)
SSID (ESSID)
Wireless Stations should use the same SSID (ESSID) as the
Access Point they wish to connect to. Alternatively, the SSID can
be set to "any" or null (blank) to allow connection to any Access
Point.
Wireless
Security
The Wireless Stations and the Access Point must use the same
settings for Wireless security. (None, WEP, WPA-PSK).
WEP: If WEP is used, the Key size (64Bit, 128Bit), Key value,
and Authentication settings must be the same on the Wireless
Stations and the Access Point.
WPA-PSK: If WPA-PSK is used, all Wireless Stations must be
set to use WPA-PSK, and have the same Pre-shared Key and
encryption system.
For Ad-hoc networks (no Access Point), all Wireless stations
must use the same security settings.