Filter
Top Products
Introduction
7
Rear Panel
Figure 4-1: Rear Panel of ADE-4300
Figure 5-2: Rear Panel of ADW-4300
RESET Button
(Reset to De-
faults)
This button will reset the ADE-4300/ADW-4300 to the factory
default settings.
To do this, press and hold the Reset Button for five (5) sec-
onds, until the Status LED is lit, then release the Reset Button,
and wait the ADE-4300/ADW-4300 to restart using the factory
default values.
POWER port
Connect the supplied power adapter here.
10/100BaseT
LAN connec-
tions
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
Note:
Any LAN port on the ADE-4300/ADW-4300 will automatically
function as an "Uplink" port when required. Just connect any
port to a normal port on the other hub, using a standard LAN
cable.
ADSL port
Connect this port to your ADSL line.