Filter
Top Products
6. Server Management
6.1 Introduction
This chapter introduces MFP Server’s system configuration utility in Windows environment.
This utility provides the most complete management and configuration functions on the MFP
Server side. This utility only provides configuration functions for MFP Server itself; it does not
include configuration functions for client side or other file server in the network environment.
The Configuration Utility provides the following configuration and management functions:
Server Management
Status: Display MFP Server Network Status.
Configure the MFP Server detail settings.
General
Configuration:
Configure general settings about the MFP Server such
as Server Name, Password, etc.
TCP/IP
Configuration:
IP Address and DHCP Server Configuration.
System
Configuration:
MFP Server Network Ability Setting and Firmware
Upgrade.
Wireless
Configuration:
Configure wireless settings and operating mode.
NOTE: Only FPS-1010MG has the “Wireless
Configuration”.
Setup:
MFP Server
Management:
For administrator to manage the MFP Server.
Administrator can force disconnect the current
connection and setup idle time out of the MFP Server.
Report: List the some information of all available MFP Servers on the Network.
23