6.3.3 System Configuration
Double Click “System” icon and the System configuration window will pop-up.
In the System configuration page, you can see all available printing methods, firmware
upgrade and load factory default function.
Upgrade
Firmware:
You can use this “Upgrade Firmware” tool to update the newest firmware of the
MFP Server. Click “ ” button and locate the correct firmware in your PC. After
find out the firmware, please click the “Upgrade” button to update firmware.
NOTE: Before you upgrade the firmware, please make sure that the IP
Address settings of the MFP Server are in the same network as your
computer.
Load
Default:
If you want to reset the MFP Server to factory default settings, please click
“Load Default”. After load default, please press “ ” to reboot your MFP
Server to make the new configuration effect.
28
