Filter
Top Products
before adding it and want to retype again, just click "Clear" and the fields will
be cleared.
Reset Click “Reset” will clear your current settings to allows you to enter again.
Current Port Forwarding Table
Delete Selected
If you want to remove some MAC address from the “Current Access Control
List”, select the MAC addresses you want to remove in the table and then
click “Delete Selected”.
Delete All If you want remove all MAC addresses from the table, just click this button.
Reset Click “Reset” will clear your current selections.
After configuration complete, please click “Apply” button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press “Continue” for configure other
settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
5.6.3 Virtual Server
Use the Virtual Server function when you need to have different servers in your LAN to handle many
services and Internet applications (e.g. Email, FTP, Web server etc.) to the Internet. Computers use
numbers called port numbers to recognize a particular service/Internet application type. The Virtual
Server allows you to re-direct a particular service port number (from the WAN Port) to a particular LAN
private IP address as its service port number. (See Glossary for an explanation on Port number).
- 52 -
Parameters Description
Enable Virtual Server Enable Virtual Server.