Filter
Top Products
You may press “Refresh” to get the new Access Point and select one of
them to click “Done” to connect.
WLAN MAC
Keep default setting: WRT-620 will use it’s own MAC address to access
the wireless LAN.
Press “MAC Clone” button: It will use PC’s MAC address to access the
wireless LAN.
After configuration complete, please click “Apply” button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press “Continue” for configure other
settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
- 70 -