Planet Technology WRT-414 Switch User Manual


 
some network application software, computer virus or hacker attacks from the
Internet. For example, some software sends network packets to the Internet in
the background, even when you are not using the Internet. So please turn off
your computer when you are not using it. This function also may not work with
some ISP. So please make sure this function can work properly, especially
when your ISP charges you by time used.
When the configuration finished please click “OK” to next step or click “Back” to previous step. After
press “OK”, you will see a web screen to prompt you the configurations save successfully. Please refer
to section 4.2.7 for the information of this screen.
4.2.5 L2TP xDSL
Select L2TP if your ISP requires the L2TP protocol to connect to the Internet. Your ISP should provide
all the information required in this section.
Parameter Description
Obtain an IP address Select it if the ISP requires you to obtain an IP address by DHCP automatically.
Host Name If your ISP requires a Host Name, type in the host name provided by your ISP;
otherwise, just leave it blank.
MAC Address To connect to the Internet, your ISP will require a MAC address from your PC.
Type in this MAC address in this section or use the “Clone MAC Address”
- 14 -