for this popular application into the input fields.
Add Add the settings into the “Current Trigger Port Table”.
Reset Click “Reset” will clear your current settings to allows you to enter again.
Current Trigger Port Table
Delete Selected If you want to remove some items from the “Current Trigger Port Table”,
select the MAC addresses you want to remove in the table and then click
“Delete Selected”.
Delete All If you want to remove all items from the table, just click this button.
Reset Click “Reset” will clear your current selections.
After configuration complete, please click “Apply” button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press “Continue” for configure other
settings or “Apply” to restart WRT-414 with new configuration.
Example: Special Applications
If you need to run applications that require multiple connections, specify the port (outbound) normally
associated with that application in the "Trigger Port" field. Then select the protocol type (TCP or UDP)
and enter the public ports associated with the trigger port to open them up for inbound traffic.
Example:
ID Trigger Port Trigger Type Public Port Public Type Comment
1 28800 UDP 2300-2400, 47624 TCP MSN Game Zone
2 6112 UDP 6112 UDP Battle.net
In the example above, when a user trigger’s port 28800 (outbound) for MSN Game Zone then the
router will allow incoming packets for ports 2300-2400 and 47624 to be directed to that user.
Note: Only one LAN client can use a particular special application at a time.
- 49 -