Filter
Top Products
Parameter Description
Mode Shows the current operation mode. You may set WRT-414 to other
operating mode by select other operating mode.
Band
2.4GHz (B): It forces the WRT-414 to operate in 802.11b only.
2.4GHz (G): It forces the WRT-414 to operate in 802.11g only.
2.4GHz (B+G): It allows the WRT-414 to operate in 802.11b and 802.11g
simultaneously.
ESSID Please make sure the ESSID of the wireless network that you will
connected and enter the correct ESSID in this field. The default value is
“default”.
WLAN MAC
Keep default setting: WRT-414 will use it’s own MAC address to access
the wireless LAN.
Press “MAC Clone” button: It will use PC’s MAC address to access the
wireless LAN.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press “Continue” for
configure other settings or “Apply” to restart WRT-414 with new configuration.
6.4 AP Bridge - Point to Point Mode
This function allows WRT-414 to bridge 2 wired Ethernet networks wirelessly.
- 63 -