Filter
Top Products
Parameter Description
Mode Shows the current operation mode. You may set WRT-414 to other
operating mode by select other operating mode.
Band
2.4GHz (B): It forces the WRT-414 to operate in 802.11b only.
2.4GHz (G): It forces the WRT-414 to operate in 802.11g only.
2.4GHz (B+G): It allows the WRT-414 to operate in 802.11b and 802.11g
simultaneously.
ESSID Please make sure the ESSID of the wireless network that you will
connected and enter the correct ESSID in this field. The default value is
“default”.
Channel Number Select the appropriate channel from the list provided to correspond with
your network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
WLAN MAC
Keep default setting: WRT-414 will use it’s own MAC address to access
the wireless LAN.
Press “MAC Clone” button: It will use PC’s MAC address to access the
wireless LAN.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press “Continue” for
configure other settings or “Apply” to restart WRT-414 with new configuration.
6.3 Station - Infrastructure Mode
WRT-414 serves as a wireless station (infrastructure). Connected to a PC or a small LAN (no
more than 5 PCs), it allows the PC or small LAN able to access the wireless network via Access
Point.
- 62 -