5.1.2 Password Setup
This screen allows you to change the management password.
Parameters Description
Current Password Enter your current password for the remote management administrator to
login to your Broadband router.
New Password Enter your new password.
Confirmed Password Enter your new password again for verification purposes.
After the setup completed, please click “Apply” to save the settings. After press “Apply”, you will see a
web screen to prompt you the configurations save successfully. You may refer to section 4.2.7 for the
information of this screen.
Note: If you forget the password, please reset the WRT-414 to the factory default by press reset button
(on WRT-414’s rear panel) over 5 seconds.
- 21 -