Filter
Top Products
User’s Guide for the Polycom Mobile Responder
2 - 10
Restoring System Settings
If you reset the VSX 8000 to the factory defaults and delete the system settings,
follow these steps to restore the system settings for the Mobile Responder:
1. Press and hold down the button on the remote control while
powering on the Mobile Responder. Hold the button until the
Polycom logo appears on the screen.
2. Use the remote control to select a language, and then follow the
remaining screens in the setup wizard.
3. Set these camera settings:
4. Set these audio settings:
On this VSX 8000
screen... Set this field... To this setting...
System > Admin Settings
> Cameras
Primary Camera 2
System > Admin Settings
> Cameras (page 2)
Camera 1 Source S-Video
Camera 2 Source Composite
People
On this VSX 8000
screen... Set this field... To this setting...
System > Admin Settings
> Audio (page 2)
Input Type Microphone
Level 10
Echo canceller Enabled
Enable Phantom
Power
Disabled